LAWN & GARDEN EQUIPMENT
MOWER, HIGH WEED 26"/28" DECK
Image for reference only 
Click on above thumbnails for alternate view |
|
Manufacturer: MULTIPLE MFG'S
Daily: $85.00
Weekly: $255.00
Monthly: $765.00
Additional Information
- MFG: BILLY GOAT
- MODEL: BC2402H
- CUTTING HEAD: 26"
- OPERATING WEIGHT 250 LBS.
- CAPACITY 6' TALL WEEDS UP TO 1" SAPLINGS
- SELF PROPELLED
- Say good-bye to sickle mowers, hand held cutters, chainsaws, etc. Designed for abuse, the Billy Goat Outback Brush Cutter cuts a clear path through the densest brush, grass and weeds over 8 feet tall, saplings up to 1.5 inches in diameter, and other problem vegetation at the rate of 2/3 acre per hour. If the front brush guard can push it over, the Outback Brush Cutter will cut it.
- -Tough Enough
- The Billy Goat Outback Brush Cutter is designed and thoroughly tested to withstand an unexpected encounter with almost anything without breaking the blade or throwing a belt.
- -Adjustable Cupped Skid Shoes
- Innovative skids allow for easier maneuverability from side to side and enhance tire traction over rough terrain. Also enable the cutting height to be adjusted.
- -Tight Quarters
- Has three forward speeds plus a reverse gear make cutting your way through tough terrain and vegetation much easier
- -The Outback Brush Cutter cuts it - Perfect for clearing unwanted grass, weeds, brush and saplings.
- -Rear discharge deck - Cut debris rolls out slowly and safely after it is cut.
- -Adjustable skid shoes - Change the cut height from 2-3/4 to 3-3/4
- -Sealed transaxle w/three forward and one reverse gear, no chains.
- -Power to spare - 13.0 HP Honda GXV manual starter
- -Puncture-proof tires, tractor lug tires are pre-filled with puncture sealant from
- the factory.
- OPERATING WEIGHT 250 LBS.
- CAPACITY 6' TALL WEEDS UP TO 1" SAPLINGS
- SELF PROPELLED
- 26" CUTTING HEAD
- Engine: Honda 13hp OHV
- Starter: Recoil
- Air Filter: Paper Cartridge
- Fuel Capacity: .75 gallon
- Drive System: 3-speed Transmission
- Drive Tires: 16 diameter ag tread
- Speeds: 3 Forward / 1 Reverse
- Ground Speeds: 1st - 1.79MPH, 2nd - 2.37 MPH, 3rd - 3.69 MPH
- Reverse: 2.77 MPH
- Rear Cable Guard: Std.
- Hand Guards: Std.
- Blade Clutch: Noram blade brake/clutch
- Cutting width: 24"
- Overall Width: 27.5
- Cut Height: Adjustable from 2-3/4 to 3-3/4
- Spindle Assembly: Buttressed in four directions to withstand the unexpected.
- Weight: 278 lbs.
- MFG: TORO
- MODEL: 23522
- CUTTING HEAD: 28"
- This versatile machine is ideal for the rental and landscape contractor industries, as performance, durability and usability are key elements in its design. The commercial grade, self-propelled brush cutter allows operators to level brush, tall weeds, saplings and heavy vegetation with ease. The Toro hydro drive brush cutter, featuring a pivoting deck, can handle brush up to six feet tall and saplings up to two inches in diameter.
- -The pivoting deck combined with the flail blade ensures easy maneuvering and increased cutting performance for even the toughest jobs.
- -Standard electric start, larger fuel tank capacity and the 28 inch cutting deck increases operator productivity.
- -Easily maneuver this powerful machine in both forward and reverse with the one-hand control feature.
- -A high-strength steel deck, 1 3/8 inch spindle shaft and larger diameter pulleys optimize the longevity of the machine.
- Cutting Width: 28"
- Cutting Height: 3 3/4"
- Engine: Toro
- Starter: Electric Start
- Fuel Capacity: 1 gallon
- Deck Material: 50 ksi high strength steel Pivoting +/- 10 degrees w/ spring return
- Spindle Diameter: 1 3/8"
- Transaxle: Hydrogear T2
- Dimensions: 87" x 30" x 42"
- Weight: 375 lbs
Also check the following item(s) related to the above:
* Prices are subject to change. Applicable sales tax, delivery, and other fees are not included in this price estimate.
* Please call us with any questions about our mower high weed 26 inch /28 inch deck rentals in Reading PA and Berks County PA.
